Siemens SIMATIC MOBY D System Manual page 305

Metal-free area
Figure C-3
Note
If the minimum guide values (h) are not observed, a reduction of the field data results. It is
possible to mount the MDS with metal screws (M3 countersunk head screws). This has no
tangible impact on the range.
When installing in the vicinity of metal, observe the instructions in the Section
MOBY D system
MOBY D
System Manual, 01/2010, J31069-D0147-A6-7618
Metal-free area for MDS D124
.
C.1 Previous MDS version with different MLFB
Previous versions
Planning the
305