Symbols Used In This Guide; Symbol Definitions - Extron electronics DTP2 T 211 User Manual

Symbols Used in this Guide

When programming in the field, certain characters are most conveniently represented by
their hexadecimal rather than their ASCII values. The table below shows the hexadecimal
equivalent of each ASCII character:
Space
Figure 13.

Symbol Definitions

]
or
|
• = Space character
W or
X!
X@
X#
X$
X%
X^
X*
ASCII to Hex Conversion Table
ASCII to Hex Conversion Table
= Carriage return with line feed
}
= Pipe character or carriage return (no line feed) can be used interchangeably.
E
= W or Escape key can be used interchangeably.
= Input or Output
= Verbose mode
= Clear/none
0
= Verbose mode (default)
1
= Tagged responses for queries
2
= Verbose mode and tagged responses for queries
3
= Text string of up to 24 characters
Default = or
DTP2‑T‑211
Alphanumeric characters and hyphens only
No distinction between upper and lower case
No spaces
First character must be a letter and the last character cannot be a hyphen
= Firmware version to the second decimal place
= Audio input
= Auto (default)
0
= Digital
1
= Analog
2
= Remote power
= No remote power (Off)
0
= DTP2 48 VDC (On)
1
= Audio toggle switch
= UP — Digital audio pass-through
1
= DOWN — Digital to analog audio extraction
2
•
DTP2‑R‑211
DTP2 T/R 211 • Remote Control 21