•
DTP T 211 inputs and output —
Inputs: One HDMI, one 3.5 mm stereo mini jack for audio
•
•
Output: One DTP2 twisted pair input on RJ 45
•
Supports computer and video resolutions up to 4K/60 @ 4:4:4 — Support of
4K/60 at 4:4:4 chroma sampling requires connection to a matching DTP2 product.
•
Stereo audio de-embedding (DTP R 211) — The captive screw stereo output is
selectable for de embedded or pass-through analog audio.
•
Analog stereo audio embedding (DTP T 211) — Analog stereo audio signals can be
selectively embedded onto the digital video output signal and transported over DTP. The
DTP2 T 211 can be set to pass the embedded digital audio, embed the analog audio,
or to automatically embed the analog audio when no digital audio is detected.
•
Accepts additional analog stereo audio signals — The DTP2 R 211 accepts stereo
analog audio from a DTP enabled product. The DTP2 T 211 accepts stereo analog
audio signals for simultaneous transmission over the same shielded twisted pair cable.
Supported HDMI 2.0b specification features include data rates up to 18 Gbps,
•
HDR, Deep Color up to 12 bit, 3D, HD lossless audio formats, and CEC pass-
through
Support for HDR (High Dynamic Range) video — Enables greater contrast range
•
and wider color gamut by providing the necessary video bandwidth, color depth, and
metadata interchange capability for HDR video.
•
Supports EDID and HDCP transmission — DDC channels are actively buffered,
allowing continuous communication between source and display.
Remote power capability — For simplified installation, the transmitter can be remotely
•
powered by a DTP2-enabled product over the twisted pair connection. It can also be
configured to provide power to the connected DTP2 receiver product.
Supports Consumer Electronics Control (CEC) signal transmission — CEC
•
control passes through from the transmitter to the receiver.
Bidirectional RS 232 and IR pass-through for AV device control — Bidirectional
•
RS 232 control and IR signals can be transmitted alongside the video signal, allowing
remote AV devices to be controlled without the need for additional cabling.
Supports multiple embedded audio formats — Compatible with a broad range of
•
multi-channel audio signals, providing reliable operation with HDMI sources.
•
Front panel USB configuration port — Provides convenient access for information
and firmware updates.
•
LED indicators for signal presence, power, and link status — Provide visual
indication of system status for real-time feedback and monitoring of key performance
parameters.
•
RJ 45 signal and link LED indicators for DTP port — Provide a means for validating
signal flow and operation, allowing quick identification of connectivity issues
•
1-inch high, quarter rack width, metal enclosures — With low profile enclosures,
the transmitter and receiver can be discreetly installed in locations such as behind a
plasma or LCD flat-panel display.
•
Includes LockIt HDMI cable lacing brackets — LockIt lacing brackets are used to
secure HDMI cables connected to the HDMI input and output connectors, preventing
accidental disconnection of the cables.
•
Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for
optimal performance.
DTP2 T/R 211 • Introduction
3
Need help?
Do you have a question about the DTP2 T 211 and is the answer not in the manual?