5.
From the
Connection Method
6.
Additional options appear. Make the appropriate selections for the
•
Only the
Extron USB Device_0
menu. Make sure that it is selected.
7.
Click
(see figure 20,
Connect
displayed in green in the
DTP2 T 211
2
2
2
DTP2 T 211
DTP2T211\dtp2t211_A_v1.00_081518.S19
Figure 20.
Add Device Window
8.
Click the
button (
Browse
9.
In the
window, locate and double-click the new firmware file, which has an
Open
extension.
NOTE: The file listed in the
firmware file for the devices.
DTP2 T 211
DTP2T211_v1.00_051818.S19
Figure 21.
Open Window for Firmware Selection
drop-down menu, select
option is available on the
). If the connection is successful, the unit name is
1
section, followed by a check mark (
Connected Device
1
1
1
3
3
) in the
3
New Firmware File (Optional)
field is an example only and not an actual
File name
DTP2T211_A_v1.00_051818.S19
DTP2 T/R 211 • Remote Control
.
USB
connection.
USB
Available Devices
2
section.
.s19
).
27