Technical Specifications; Certificates And Approvals - Siemens Sinamics Connect Series Operating Instructions Manual

Technical specifications

8.1

Certificates and approvals

NOTICE
Invalid approvals due to certain modifications
The device approvals are voided if the enclosure is physically modified (for example,
openings were created to make LEDs on a plug-in card in the device visible) or if cables are
routed from the inside out of the device or from the outside into the device (for example, to
connect sensors or displays).
• Submit the device for approval again after the modifications are made.
The device meets the guidelines listed in the following sections.
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
EU Declaration of Conformity
(https://support.industry.siemens.com/cs/ww/en/ps/25435/cert).
UL approval
The following approvals are available for the device:
● Underwriters Laboratories (UL) in accordance with standards UL61010-1 and UL61010-2-
201 (IND.CONT.EQ), File E217227
● Canadian National Standard CAN/CSA-C22.2 No. 61010-1-12 and CAN/CSA-C22.2 No.
61010-2-201
European RoHS Directive
The SINAMICS CONNECT complies with the Directive 2011/65/EU regarding limiting the
use of certain hazardous substances.
SINAMICS CONNECT
Operating Instructions, 10/2018, A5E45421408
8
81