Siemens Sinamics Connect Series Operating Instructions Manual page 50

Hide thumbs Also See for Sinamics Connect Series:

Table of Contents

Configuring the device

5.2 Standard Web pages

8. Set the sampling period (an integer equal to or greater than 1) in the "Sample Cycle"

input field. The period is measured in seconds.

(Repeat steps 7 and 8 to set other one or more parameters as desired.)

9. Click "Save" to activate the parameter settings or click "Close" to cancel the settings.

Note: For the first login, all the parameters are displayed with their default settings in the

predefined parameter list (Page 76). You can also click "Default" to restore all the

parameters to their default settings.

10. The Web browser jumps back to the quick configuration home page. Repeat steps 1 to 9

to complete configuring the remaining ports as desired.

11. Click "Next" in the lower-right corner to start configuring MindSphere.

12. In the window that opens, choose whether to use a proxy server for transferring data to

MindSphere via the check box.

Note: By default, the check box is deselected.

13. Assuming that you choose to use a proxy server, configure the proxy server by setting the

basic server parameters in the input fields.

Note: When you do not use a proxy server, skip to step 5 to directly start uploading the

configuration file.

SINAMICS CONNECT

Operating Instructions, 10/2018, A5E45421408

Table of Contents