Siemens Sinamics Connect Series Operating Instructions Manual page 66

Getting connected to MindSphere
6.3 Creating an asset in Asset Manager
4. Choose the category "Dynamic".
5. Under "Variables", click the button "Add variable".
6. Proceed with the following steps for each variable, for example,
"port1_Act_filtered_DC_link_volt":
– 6a: Enter the name of the variable.
– 6b: Select the data type of the variable.
– 6c: Enter the unit of the variable.
7. Click "Add variable" to add the next variable.
– Repeat step 6 until all of your variables are added.
64
SINAMICS CONNECT
Operating Instructions, 10/2018, A5E45421408