Technical Data; Technical Specifications Of The Link - Siemens IE/PB LINK PN IO Operating Instructions Manual

Technical data

6.1

Technical specifications of the LINK

Table 6- 1 Technical specifications
Technical specifications
Attachment to Industrial Ethernet
Amount
Design of the PROFIBUS interface
Design of PROFINET interface (2port
switch)
Electrical data
External power supply, redundant
setup
Current consumption
Effective power loss
Permitted ambient conditions
Ambient temperature
Relative humidity
Operating altitude
Contaminant concentration
Design, dimensions and weight
IE/PB LINK PN IO
Operating Instructions, 11/2017, C79000-G8976-C393-02
1 x PROFIBUS interface
1 x PROFINET interface with 2port switch
Connector
Transmission rate
Connector
Transmission rate
Aging time
Special features of the ports X1 P1 R
and X1 P2 R
Power supply
Permitted range
From external power supply
Typical
Maximum
During operation with the rack in-
stalled horizontally
During operation with the rack in-
stalled vertically
During storage
During transportation
During operation
During operation
Acc. to ISA-S71.04 severity level G1, G2, G3
9-pin D-sub female connector
9,6 / 19,2 / 45,45 / 93,75 / 187,5 / 500 Kbps
1,5 / 3 / 6 / 12 Mbps
2 x RJ-45 jacks
10 / 100 Mbps
When working with PROFINET IO and
cyclic transfer, the transmission speed of
100 Mbps full duplex is mandatory.
5 minutes
Integration in ring topology / MRP possible
24 VDC
+20.4 V to +28.8 V
200 mA typical (without connected bus
•
adapter)
300 mA maximum
•
4.8 W
7.2 W
0 °C to +60 °C
0 °C to +40 °C
-40 °C to +70 °C
-40 °C to +70 °C
≤ 95 % at 25 °C, no condensation
≤ 2000 m above sea level at max. 60 °C
ambient temperature
6
77