Address Of Ce-Authorized Manufacturer; Hardware Description; Interface Overview - Siemens Sinamics Connect Series Operating Instructions Manual

Technical specifications

8.5 Hardware description

Typical power consumption
Basic device
8.4.5

Address of CE-authorized manufacturer

The CE Declaration of Conformity is held on file available to the competent authorities at the
following address:
Siemens AG
Digital Factory
Motion Control
Frauenauracher Straße 80
DE-91056 Erlangen
Germany
8.5 Hardware description
8.5.1

Interface overview

Component/interface
PWR
SD
USB
OC
USER
RESET
USER
X1
X2
X80
X121
X122
88
Power consumption (at a rated voltage of 24 V)
3.5 W
Description Meaning
Power supply LED Power (green)
SD card LED Micro SD card active (green)
USB LED USB power (5 V) available (green)
Over current LED Over current (red)
User LED Reserved
RESET button For a reset of the CPU
USER button For converter identification
Ethernet port 1 RJ45 Ethernet connection 1 for the access to the
Internet (to MindSphere)
Ethernet port 2 RJ45 Ethernet connection 2 for the access to the
plant network (to PC)
Power supply Power supply interface
RS232 interface 1 For connecting the converter to the SINAMICS
CONNECT
RS232 interface 2 For connecting the converter to the SINAMICS
CONNECT
SINAMICS CONNECT
Operating Instructions, 10/2018, A5E45421408