Unipulse F600AT Operation Manual page 80

■ Communication
RS-232C communications interface
SI/F (2-wire serial interface)
■ Option
BCD data output
D/A converter
CC-Link
DeviceNet
■ External Input/Output
External output signal
(9 points)
External input signal
(11 points)
■ General Performance
Required power supply
Power consumption
Operating conditions
Dimensions
Weight
Asynchronous communication method
Baud rate 1200bps to 19200bps
2-wire serial interface for connecting a UNIPULSE-manufactured printer,
external display, etc.
Asynchronous communication method
Baud rate 600bps
Open collector output
The output rate can be changed.
Voltage output 0 to 10V
Current output 4 to 20mA
Number of occupied stations
Baud rate
Station number
Baud rate 125k, 250k, 500kbps
Node address 0 to 63
Transistor open collector output. (Emitter = COM terminal)
The output turns ON when the transistor turns ON.
ON when shorted with COM terminals by contact (relay, switch, etc.) or
non-contact (transistor, TTL open-collector output, etc.)
AC spec. AC100V to AC240V (+10% -15%)
[Free power supply 50/60Hz]
DC spec. DC24V (±15%)
(Depending on the request at the time of order)
AC spec. 18W max
DC spec. 18W max
Temperature Operating temperature range: -10 ℃ to +40 ℃
Storage temperature range:
Humidity 80%RH or less (non-condensing)
96W × 96H × 138D (mm) (not including projections)
Approx.1.0kg
22.SPECIFICATIONS
1, 2, 4 STAT.
156k, 625k, 2.5M, 5M, 10Mbps
1 to 64 (when one station is occupied)
1 to 63 (when two station is occupied)
1 to 61 (when four station is occupied)
-20 ℃ to +60 ℃
71