For Final Discharge - Over Weight/Under Weight Comparison; (When "Dis.-O/U" Is Selected By Comp Mode Sel.); For Final Discharge - Hi/Lo Limit Comparison; (When "Dis.-H/L" Is Selected By Comp Mode Sel.) - Unipulse F600AT Operation Manual

■ For final discharge – over weight/under weight comparison

(when "DIS.-O/U" is selected by comp mode sel.)

Setting item
[FINAL]
[SP1]
[SP2]
[CPS]
[AFFC]
[OVER]
[UNDER]
When the net ≧ final weight – SP1, the status display "SP1" lights, and the signal output "HH/SP1"
*2
turns ON.
When the net ≧ final weight – SP2, the status display "SP2" lights, and the signal output "GO/SP2
*2
turns ON.
When the net ≧ final weight – CPS, the status display "SP3" lights, and the signal output "LL/SP3"
*2
turns ON.
When the net ＞ final weight + over weight, the status display "OVER" lights, and the signal output
"HI/OVER" turns ON.
When the net ＜ final weight – under weight, the status display "UNDER" lights, and the signal output
"LO/UNDER" turns ON.
The fall regulation value "AFFC" relates to the automatic fall compensating function.
*2: Output in the simple comparison mode. For the sequence mode, refer to page 40.
■ For final discharge – HI/LO limit comparison

(when "DIS.-H/L" is selected by comp mode sel.)

Setting item
[FINAL]
[SP1]
[SP2]
[CPS]
[AFFC]
[HI]
[LO]
When the net ≧ final weight – SP1, the status display "SP1" lights, and the signal output "HH/SP1"
turns ON.
When the net≧final weight – SP2, the status display "SP2" lights, and the signal output "GO/SP2 turns
ON.
When the net ≧ final weight – CPS, the status display "SP3" lights, and the signal output "LL/SP3"
turns ON.
When the weight value ＞ HI limit, the signal output "HI/OVER" turns ON.
When the weight value ＜ LO limit, the signal output "LO/UNDER" turns ON.
6.HOW TO SET THE FUNCTIONS
Input range
00000 to 99999
00000 to 99999
00000 to 99999
0000 to 9999
00000 to 99999
000 to 999
000 to 999
Input range
00000 to 99999
00000 to 99999
00000 to 99999
0000 to 9999
00000 to 99999
±00000 to ±99999
±00000 to ±99999
27