Unipulse F600AT Operation Manual page 13

1.OUTLINE
■ Signal input/output connector
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
Compatible connector : FCN-361J024-AU
Connector cover: FCN-360C024-B
(Connector & cover optional type: CN50)
■ Frame ground
Please ground the frame ground terminal to prevent failures due to static electricity.
(The frame and the frame ground terminal are conducted.)
It may be better to remove depending on the environment of the installation location.
■ Protective ground
Be sure to ground the protective ground terminal to prevent electric shocks.
■ RS-232C connector
RS-232C connector to transmit/receive measurement data and status information, etc.
The compatible connector is HOSIDEN-manufactured TCP8080-015267 or equivalent.
Optionally available RS-232C cable (cross) [CA81-232X] is connectable.
■ Option slot
Any one of the following optional boards can be mounted.
- BCD data output
- D/A converter (voltage or current output)
- CC-Link interface
- DeviceNet interface
4
COM B1
HH/SP1 B2
HI/OVER B3
GO/SP2 B4
LO/UNDER B5
LL/SP3 B6
END B7
NZ B8
STAB B9
ERR B10
SI/F B11
SI/F B12
COM
CODE0
CODE1
CODE2/KEY_LOCK
G/N
DZ
TARE ON
TARE OFF
HOLD/JUDGE
F/D
START
STOP