Hi/Lo Limit Comparison Selection; Near Zero Comparison Selection/ Preset Near Zero Value; Tare Setting Selection/ Preset Tare Value - Unipulse F600AT Operation Manual

■ HI/LO limit comparison selection

Valid when "HI － LO COMP" or "DIS. － H/L" is selected by COMP MODE SEL.
Select the weight value for HI-HI limit, HI limit, LO limit, and LO － LO limit comparisons.
By selecting [COMP OFF], all comparisons are turned OFF.
Alternatives: ［GROSS］ ［NET］ ［COMP OFF］

■ Near zero comparison selection/ Preset near zero value

Valid in all comparison modes.
After selecting the weight value for comparisons, if the weight value ≦ preset near zero value, the
status display "NZ" lights, and the "NZ" output turns ON.
By selecting [COMP OFF], the "NZ" output is turned OFF.
NEAR ZERO COMP.: ［GROSS］ ［NET］ ［COMP OFF］ ［ABS GROSS］
NEAR ZERO:
NEAR ZERO COMP.
[GROSS]
[NET]
[COMP OFF]
[ABS GROSS]
[ABS NET]

■ Tare setting selection/ Preset tare value

Valid in all comparison modes.
By turning [PRESET TARE WGT.1] ON, the net changes according to the following expression:
Net = Gross － Preset tare value
(However, if tare subtraction is input, the net weight becomes 0.)
PRESET TARE WGT.1:
PRESET TARE WGT.2:
［ABS NET］
00000 to 99999
Operation near zero
ON when gross ≦ near zero setting
ON when net ≦ near zero setting
Always OFF
ON when | gross | ≦ near zero setting
ON when | net | ≦ near zero setting
［OFF］ ［ON］
00000 to 99999
5.COMPARISON SETTING
25