Unipulse F600AT Operation Manual page 39

7.OPERATION SETTING
■ Backlight lighting time/ Backlight bright-and-dark time
This function changes the brightness of the backlight when touch screen has not been used for
certain period of time.
The ON time ( lighting time of the backlight) and the Low time ( bright→dark switching time of the
backlight) are set up.
When you use it in the state which a display is always in sight, set the ON time to 0 minutes.
When you want the backlight always bright, set 0 minutes for both the ON time and the Low time.
The backlight is turned bright by touching the panel when the backlight is turned off or it is dark.
Ex.) Set 60 minutes to ON time, 10 minutes to Low time.）
Setting range: 0 to 99 (min.) (with both time)
■ Display table selection
Select the display of set values at the bottom of the weight display screen from three combinations.
The combinations vary with comparison modes.
Alternatives:
Explanation of combination in each comparison mode
【For HI/LO limit comparison (when "HI-LO COMP" is selected)】
- HH, H, L, LL
- H, L, T, Z
- HH, LL, T, Z
【For final discharge – overweight/underweight comparison (when "DIS.-O/U" is selected)】
- F, SP1-3
- F, SP3, O, U
- F, SP3, T, Z
【For final discharge – high/low limit comparison (when "DIS.-H/L" is selected)】
- F, SP1-3
- F, SP3, H, L
- F, SP3, T, Z
Abbreviations
HH..... HI-HI limit
T ........ Preset TARE
F ........ FINAL weight
30
Bright Dark
min.
10
min.
60
［F, SP1-3］ ［F, SP3, H, L］ ［F, SP3, T, Z］
(* When "DIS.-H/L" is selected)
(HI-HI limit, HI limit, LO limit, LO-LO limit)
(HI limit, LO limit, Preset TARE, NEAR ZERO)
(HI-HI limit, LO-LO limit, Preset TARE, NEAR ZERO)
(FINAL weight, SP1, SP2, SPS)
(FINAL weight, SPS, Overweight, Under weight)
(FINAL weight, SPS, Preset TARE, NEAR ZERO)
(FINAL weight, SP1, SP2, SPS)
(FINAL weight, SPS, HI limit, LO limit)
(FINAL weight, SPS, Preset TARE, NEAR ZERO)
H.........HI limit
Z ......... NEAR ZERO
SP1 .....SP1
Light Out
L .........LO limit LL ........LO-LO limit
O.........Over weight U ..........Under weight
SP2 .....SP2 SP3.......SPS