Unipulse F600AT Operation Manual page 12

■ AC power source input connector/ DC power source input terminal block
-
AC spec.
Connect with AC power source cable supplied.
AC voltage is 100V to 240V(
-
DC spec. (Designated when it is shipped.)
Connect DC power source. Voltage input is DC24V (
About the power cable
- The power cable attached to this product as standard equipment can be used in
the AC100V power supply in Japan. (Official ratings voltage AC125V)
Please use the power cable authorized in the country when you use this product
outside Japan.
- Our company sells following resistance pressure cable AC250V (European
standard product) separately.
Please purchase it from us when you need after confirming its plug shape/voltage.
CA325AC3P-CEE7/7-B2 : CEE7/7 Plug cable (2m)
■ Analog input/output connector
Pin No.
1
2
3
4
5
6
7
Compatible connector : ETB42-07P
(Connector optional type: CN80)
10%, -15%) AC frequency is 50Hz/60Hz.
+
Signal (6-wire)
+SIG
-SIG
+EXC
+S
-EXC
-S
SHIELD
15%).
±
Signal (4-wire)
+SIG
-SIG
+EXC
(Connect 3 to 4)
-EXC
(Connect 5 to 6)
SHIELD
1.OUTLINE
3