Reading Out Measured Values; Control Unit Counters - REMEHA GAS 120 ACE Series User Manual

9 Settings
Parameter Text display
AP074 Force summer mode
AP079 Building Inertia
AP080 Frost min out temp
AP091 Outside Sens. Source
AP077 Max. display level
9.11

Reading out measured values

Tab.39 Navigation for basic installer level
Level Menu path
Basic installer
(1) See the column "Submenu" in the following table for the correct navigation. The counters are grouped in specific functionalities.
Tab.40 Counters at basic installer level
Code Display text
AC005 CH Energy
Consumed
AC006 DHW Energy
Consumed
Tab.41 Navigation for installer level
Level Menu path
Installer
(1) See the column "Submenu" in the following table for the correct navigation. The counters are grouped in specific functionalities.
60 MID _HMI T-control - Gas 120 ACE
The heating is stopped. Hot water is maintained. Force Summer Mode
Adjustment range:
0 =Off
1 =On
Inertia of the building used for heat up speed
Adjustment range:
from 0 to 10
Outside temperature below which the antifreeze protection is activated
Adjustment range:
from -30 °C to 20 °C
Type of outside sensor connection to be used
Adjustment range:
0 =Auto
1 =Wired sensor
2 =Wireless sensor
3 =Internet measured
4 =None
Maximum Level of parameters and signals to display on MK
Adjustment range:
1 =End user
2 =Installer
3 =Installer advanced
4 =Lab
5 =Controls Development
> Installation Setup > CU-GH08 > Submenu
Description
Energy consumed for central
heating
Energy consumed for domestic
hot water
> Installation Setup > CU-GH08 > Submenu
Description
9.11.1

Control unit counters

> Parameters, counters, signals > Counters
(1)
Range
0 kWh - 4294967294
kWh
0 kWh - 4294967294
kWh
> Parameters, counters, signals > Counters
(1)
Factory
setting
-10
Submenu
Gas fired appliance
Gas fired appliance
7717201 - v03 - 25062019
0
3
0
2