Domestic Hot Water Temperature; Selecting The Operating Mode; Forcing Domestic Hot Water Production (Override) - REMEHA GAS 120 ACE Series User Manual

Fig.54
14 : 23 Z... Zone setup
Heating Schedule
Sunday
6:00 House 20.0°C
22.00 Nuit 16.00°C
Edit schedule entry
6:00 House 20.0°C
Add time and Activity
Copy to other day
Set activity temperatures
8.8

Domestic hot water temperature

Tab.27
Mode
Scheduling
Manual
Hot water boost
Holiday
Antifrost
7717201 - v03 - 25062019
Creating a timer programme for heating
A timer programme can be used to vary the room temperature in a living
zone depending on activities during the day. This can be programmed for
each day of the week.
1. Select the icon for the zone to be programmed,
Off
2. Select Zone configuration > Heating Schedule.
3. Select the programme to be modified.
4. Select the day to be modified.
5. Carry out the following actions according to your needs:
MW-5000770-2
Selecting a timer programme
In the Timer programming operating mode, three programs are available
per zone. Each program is independent.
To select a timer programme for a zone:
1. Select the icon for the affected zone,
Off
2. Select Scheduling.
3. Select the desired timer programme.
8.8.1
For the production of domestic hot water, you can choose between five
operating modes.
1. Select the
Off
2. Select the desired operating mode:
Selection of a timer programme
The domestic hot water temperature remains at the comfort temperature
permanently
The production of domestic hot water is forced at the comfort temperature
for a defined duration
The domestic hot water temperature is reduced during an absence period
to save energy
The installation and equipment are protected during the winter period
8.8.2
Regardless of the selected operating mode, you can force domestic hot
water protection to the comfort temperature for a defined duration.
1. Select the
Off
2. Select Hot water boost.
3. Define the duration in Hour and in Minute.
The programmed activities for Sunday are displayed.
The last activity of the day remains active until the first activity of the
following day.
Modify the timings for programmed activities.
Add a new activity.
Delete a programmed activity (choose the activity "Delete").
Copy programmed daily activities to other days.
Modify temperatures linked to an activity.

Selecting the operating mode

icon for the DHW zone.
Description

Forcing domestic hot water production (override)

icon for the DHW zone.
, for example.
, for example.
MID _HMI T-control - Gas 120 ACE
8 Operation
43