Table of Contents
Advertisement
1.2.3 System Output
Set the resolution,CVBS output,rotate,scalling,brightness,contrast,hue and saturation,as shown in the picture.
1.2.4 Network Setting
Change the IP address to be in the same network segment with the route,and restart the device.If you forget
the IP address,long press the
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
support@rgblink.com
【
reset key
】
on the rear panel to reset the settings,the default IP is 192.168.1.169.
|
www.rgblink.com
4
Advertisement
Table of Contents
