Terminal Id Table; Data Format Editor Commands - Honeywell Xenon 1500 User Manual

Terminal ID Table

Terminal
IBM
USB

Data Format Editor Commands

Send Commands
Send all characters
F1 Include in the output message all of the characters from the input
message, starting from current cursor position, followed by an insert
character. Syntax = F1xx where xx stands for the insert character's hex
value for its ASCII code.
Refer to the
page A-4 for decimal, hex and character codes.
Send a number of characters
F2 Include in the output message a number of characters followed by an
insert character. Start from the current cursor position and continue for
"nn" characters or through the last character in the input message,
followed by character "xx." Syntax = F2nnxx where nn stands for the
numeric value (00-99) for the number of characters, and xx stands for
the the insert character's hex value for its ASCII code.
Refer to the
page A-4 for decimal, hex and character codes.
Send all characters up to a particular character
F3 Include in the output message all characters from the input message,
starting with the character at the current cursor position and continuing
to, but not including, the search character "ss," followed by an insert
character. The cursor is moved forward to the "ss" character. Syntax
= F3ssxx where ss stands for the search character's hex value for its
ASCII code, and xx stands for the insert character's hex value for its
ASCII code.
Refer to the
page A-4 for decimal, hex and character codes.
5 - 4
Model(s)
USB SurePOS Handheld
Scanner
USB SurePOS Tabletop
Scanner
Serial
PC Keyboard
Mac Keyboard
Japanese Keyboard (PC)
HID POS
ASCII Conversion Chart (Code Page 1252),
ASCII Conversion Chart (Code Page 1252),
ASCII Conversion Chart (Code Page 1252),
Terminal
ID
128
129
130
124
125
134
131
beginning on
beginning on
beginning on