Omron Cobra 350 CR/ESD User Manual page 104

8.2 Warning Labels
All warning labels on the Cobra 350 should be checked on a weekly basis for being present
and legible. If any of the labels are missing or illegible, they should be replaced. The labels,
with part numbers, are:
Read User's Guide, Impact Warning Label, 18241-000
l
These labels instruct the user to read the user's guide before using the robot, and to be
aware of the potential of impact by the robot.
This is placed on the side of the upper cover of the robot.
Gravity/Brake Release Label, 18272-000
l
This label warns about the possibility of a robot joint dropping suddenly when the
brake release is pressed because of gravity. In the case of the Cobra 350, this applies to
the quill and tool flange.
104
Figure 8-1. Read Manual and Impact Warning Label
Figure 8-2. Location of Brake Release/Gravity Warning Label
Cobra 350 User's Guide 05624-000 Rev. K