Table of Contents
Advertisement
6 Settings
6.4
Setting the parameters
Fig.33
Fig.34
MW-3000249-4
Fig.35
38
6.4.1
1. Access the heating parameters by pressing the
2. Display the parameters for the required circuit by pressing the
MW-5000144-3
3. Confirm by pressing the
4. Access setting of the heating water temperature set point by pressing
5. Set the heating water temperature set point by pressing the
6. Confirm the new temperature set point by pressing the
6.4.2
1. Access the domestic hot water production parameters by pressing the
2. Modify the domestic hot water temperature set point by pressing the
MW-6000254-2
3. Confirm the new temperature set point by pressing the
6.4.3
The cooling function can be managed via the PROG COOL sub-menu
dedicated to timer programming.
The set point flow temperature for cooling mode corresponds to the
CP270 parameter for underfloor heating and CP280 for a convection fan.
The CP270 and CP280 parameters can be accessed by the Installer.
Setting the room temperature set point in comfort mode
Important
The room temperature set point can be managed via the TIME
PROG sub-menu dedicated to timer programming.
Important
To set the room set point temperature in reduced mode, it is
necessary to set the CP080 parameter available in the User
menu.
When the setting is made in a reduced mode range, this setting
shortcut is used only to set the set point temperature in comfort
mode corresponding to the CP081.
key.
The name of the circuit and the heating water temperature set point
are displayed alternately.
the
key.
key.
Important
Press the
key to cancel all inputs.
Setting the domestic hot water temperature
Important
Domestic hot water production can be managed via the TIME
PROG sub-menu dedicated to timer programming.
key.
or
key.
Important
Press the
key to cancel all input.
Go back to the main display by pressing the
Activating Forcing of the cooling function
key twice.
key.
key.
7611444 - v06 - 04032019
or
or
key.
key.
Advertisement
Table of Contents
Troubleshooting
