Table of Contents
Advertisement
Fig.36
MW-5000401-2
Fig.37
MW-5000402-2
Fig.38
MW-5000403-2
Fig.39
Fig.40
7611444 - v06 - 04032019
1. Access Forcing of the cooling function by pressing the
2. Access Forcing of the cooling function by pressing the
3. Activate Forcing of the cooling function by pressing the
4. Confirm Forcing of the cooling function by pressing the
5. Go back to the main display by pressing the
MW-5000404-2
6.4.4
The Manual Forcing menu is only used with the heating mode.
1. Access the Manual Forcing
Important
The heat pump switches to cooling automatically when the
outdoor temperature is +2 °C greater than the summer/winter
switching set point temperature (22 °C). The forced cooling
function is used to have cooling regardless of the outdoor
temperature.
Important
Forcing of the cooling function is possible only if the Installer
enabled the cooling function during Installation.
Activating Manual Forcing for heating
key.
menu.
6 Settings
key.
key.
key.
key.
39
Advertisement
Table of Contents
Troubleshooting
