Setting The Parameters; Modifying The User Parameters; Setting The Room Temperature Set Point In Comfort Mode - DeDietrich ALEZIO O HYBRID User Manual

6 Settings
6.2

Setting the parameters

Fig.37
Fig.38
Fig.39
Fig.40
MW-3000249-4
38 200 ESL HYBRID
6.2.1
1. Access the User menu.
2. Select the desired sub-menu by pressing the
3. Confirm the selection by pressing the
4. Select the required parameter by pressing the
5. Confirm the selection by pressing the
6. Modify the value of the parameter using the
7. Confirm the new value of the parameter by pressing the
8. Go back to the main display by pressing the
6.2.2
1. Access the heating parameters by pressing the
2. Display the parameters for the required circuit by pressing the
MW-5000144-3
3. Confirm by pressing the
4. Access setting of the heating water temperature set point by pressing
5. Set the heating water temperature set point by pressing the
6. Confirm the new temperature set point by pressing the

Modifying the User parameters

Caution
Altering the factory settings may impair operation of the appliance.
Important
The User menu is available only when the
through the list of adjustable parameters.

Setting the room temperature set point in comfort mode

Important
The room temperature set point can be managed via the TIME
PROG sub-menu dedicated to timer programming.
Important
To set the room temperature set point in reduced mode, it is
necessary to set parameter
menu.
When the setting is made in a reduced mode range, this setting
shortcut is used only to set the temperature set point in comfort
mode corresponding to
key.
The name of the circuit and the heating water temperature set point
are displayed alternately.
the key.
key.
Important

Press the key to cancel all input.
Important
The setting for the room temperature set point in comfort mode
can also be accessed in the User menu, parameter
icon flashes.
or key.
key.
or keys to scroll
key.
or keys.

key.
available in the User
.
key twice.
key.
7613346 - v05 - 13112018
key.
or
or
key.
.