Setting The Parameters; Modifying The User Parameters; Activating The Cooling Function - DeDietrich AWHP 4 MR User Manual

6 Settings
6.2

Setting the parameters

Fig.35 Displaying the User menu
Fig.36 Cooling function
Fig.37 Confirmation
MW-6000366-1
38 MIV-4

6.2.1 Modifying the User parameters

Note
The name of the PCB is displayed. Check that it is actually the
PCB on which the setting must be made.
The parameters in the User menu can be modified by the user to meet his
central heating and domestic hot water comfort requirements.
Caution
Modification of the factory settings may impair operation of the ap­
pliance.
1. Access the User menu.
2. Select the desired parameter by pressing
the list of parameters that can be adjusted.
3. Confirm the selection by pressing
4. Modify the value of the parameter by pressing
5. Confirm the new value of the parameter by pressing
6. Go back to the main display by pressing
MW-5000040-3

6.2.2 Activating the cooling function

Note
The name of the PCB is displayed: check that it is actually the
PCB on which the setting must be made.
1. Access the User menu.
2. Select the AP015 cooling parameter by pressing the
and confirm by pressing the
MW-6000365-1
3. Select cooling function shut-down by pressing the
firm by pressing the
4. Go back to the main display by pressing
or to scroll through
.
or
.

key.
key.
.

7623755 - v02 - 03072015
.
.
or key
key and con­