Regional And Ergonomic Parameters - DeDietrich ALEZIO O HYBRID User Manual

5 Operation
Tab.20 Selecting my timer programme
Function
Select a timer programme
for heating
Select a timer programme
for domestic hot water
Tab.21 Change my timer programme
Function
Change the timer program
for heating
Change the timer program
for cooling
Change the timer program
for domestic hot water
Tab.22 Going on holiday
Function
Holiday operation for all
zones
Tab.23 Resolving operating errors
Symptoms
If your appliance malfunctions, a message with an er­
ror code is displayed on the main screen of the control
panel.
This error code is important for the correct and rapid
diagnosis of the type of malfunction and for any tech­
nical assistance that may be needed.
Tab.24 Switching off the heating
Function Access
Switching off the cen­
Press the rotary button
tral heating
5.4

Regional and ergonomic parameters

28 200 ESL HYBRID
Access
Select the Zone to be changed with the rotary
button, for example
programmes heating > Time programmes
Select the Zone Domestic Hot Water with
the rotary button > Time programmes > Select
the DHW timer programme
Access
Select the Zone to be changed with the rotary
button, for example
programmes heating
Select the Zone to be changed with the rotary
button, for example
programme cooling
Select the Zone Domestic Hot Water with
the rotary button > Time programmes
Access
Press the rotary button
mode
> Central heating On/Off
You can personalise your appliance by modifying the parameters linked to
your geographic location and the ergonomics of the control panel.
Settings
CIRCA > Time
Select the timer programme to be used
Settings
To select a timer programme to be changed
CIRCA > Time
Select the day to be changed:
CIRCB > Time
Settings
– Set the date and time for the start of the ab­
sence period
– Set the date and time for the end of the ab­
> System holiday
sence period
The temperature during the holiday period will
be XX °C.
Actions
1. Make a note of the code displayed on the screen.
2. Remedy the problem described by the error code or contact the
installer.
3. Switch the heat pump off and back on to check that the cause of
the error has been removed.
4. If the code is displayed again, contact the installer.
Settings
Enable and disable the central heating.
Change the programmed activities and
timers.
Add a new activity in the empty field "---".
Delete a programmed activity: choose
"Delete" in the activity.
Copy programmed daily activities to other
days: Copy to other days.
7763552 - v02 - 29062020