Table of Contents
Advertisement
1 Safety
1.2
Recommendations
8
Caution
Install the hydraulic module and the boiler for the
hybrid system in a location protected from
freezing.
Caution
If the home is unoccupied for a long period and
there is a risk of frost, drain the hybrid system.
Important
Keep the hybrid system accessible at all times.
Important
Never remove or cover labels and data plates
affixed to the appliances. Labels and data plates
must be legible throughout the entire lifetime of
the appliance.
Immediately replace damaged or illegible
instructions and warning stickers.
Important
Remove the casing only to perform maintenance
and repair work. Put the casing back in place
after maintenance and repair work.
Warning
Only qualified persons are authorised to
assemble, install and maintain the installation.
Warning
The hybrid heat pump (heat pump and boiler)
must be disassembled and disposed of by a
qualified installer in accordance with local and
national regulations.
Warning
If the mains lead is damaged, it must be replaced
by the original manufacturer, the manufacturer's
dealer or another suitably skilled person to
prevent hazardous situations from arising.
Caution
The hybrid system should be in Summer or Frost
Protection mode rather than switched off to
guarantee the following functions:
Anti blocking of pumps
Frost Protection
7611444 - v06 - 04032019
Advertisement
Table of Contents
Troubleshooting
