Setting The Parameters; Setting The Time And Date - DeDietrich ADVANCE GSHP User Manual

Parameters
PERMUT
CALIBR.ROOM A
CALIBR.ROOM B
CALIBR.ROOM C
ANTIFR.ROOM A
ANTIFR.ROOM B
ANTIFR.ROOM C
Tab.22 Menu #TIME .DAY
Parameters
HOURS
MINUTE
DAY
DATE
MONTH
YEAR
SUM.TIME
6.2

Setting the parameters

6.2.1

Setting the time and date

7611407 - v07 - 14022022
Description
Used to establish the pilot heat pump:
AUTO : the pilot heat pump automatically switches every 7
days
Can be set from 1 to 10: number of the heat pump chosen
as the pilot heat pump
Calibration of the room temperature sensor on circuit A.
Make this setting 2 hours after switching on, when the room
temperature has stabilised.
Calibration of the room temperature sensor on circuit B.
Make this setting 2 hours after switching on, when the room
temperature has stabilised.
Calibration of the room temperature sensor on circuit C.
Make this setting 2 hours after switching on, when the room
temperature has stabilised.
Room temperature at which frost protection on circuit A is ac­
tivated.
Can be set from 0.5 to 20°C.
Room temperature at which frost protection on circuit B is ac­
tivated.
Can be set from 0.5 to 20°C.
Room temperature at which frost protection on circuit C is
activated.
Can be set from 0.5 to 20°C.
Description
Hours.
Can be set from 0 to 23.
Minutes.
Can be set from 0 to 59.
Day of the week.
Can be set from Monday to Sunday.
The day's date.
Can be set from 1 to 31.
Month.
Can be set from January to December.
Year.
Can be set from 2014 to 2099.
AUTO :
Automatic switch to summer time on the last Sunday in
March
Automatic switch to winter time on the last Sunday in
October
MANU :
For countries where the time change is done on other
dates or is not in use
#TIME .DAY menu - User Level
1. Go to the User level by pressing the
2. Select the #TIME .DAY parameter by turning the settings button.
Factory setting Customer setting
AUTO
Room tempera­
ture on circuit A
Room tempera­
ture on circuit B
Room tempera­
ture on circuit C
6°C
6°C
6°C
Factory setting Customer setting
AUTO
key.
GSHP
6 Settings
27