Table of Contents
Advertisement
1.3
Specific safety instructions
7611444 - v06 - 04032019
Important
Keep this document close to the place where the
appliance is installed.
Caution
Do not make any modifications to the hybrid
system without the written consent of the
manufacturer.
Warning
In accordance with the NFC 15.100 electrical
safety standard, only qualified professionals are
permitted access to the inside of the appliance.
Caution
Do not neglect to service the hybrid system.
Contact a qualified professional or take out a
maintenance contract for the annual servicing of
the hybrid system.
Warning
Refrigerant fluid and pipes:
Use only R410A refrigerant fluid to fill the
installation.
Use tools and pipe components especially
designed for use with R410A refrigerant fluid.
Use copper pipes deoxidised with phosphorus
to carry the refrigerant fluid.
Store the refrigerant connection pipes away
from dust and humidity (risk of damage to the
compressor).
Do not use a load cylinder.
Protect the heat pump components, including
the insulation and structural elements. Do not
overheat the pipes as brazed components may
cause damage.
Contact between the refrigerant fluid and a
flame may result in emissions of toxic gases.
1.3.1
Refrigerant fluid R410A
Product identification
Emergency call: Anti-poison Centre INRS/ORFILA +33
0145425959
Hazard identification
Effects harmful to health:
1 Safety
9
Advertisement
Table of Contents
Troubleshooting
