Ems Communication Checking - Alpha ESS Storion-SMILE-T10 Installation Manual

Your Smart Energy
Figure 61 Date&Time Setting Interface
Step 20: Click Language to set language

4.3 EMS Communication Checking

After wiring and EMS setting, check that the status indicators are normal. Then enter
MENU->Status->Communication
to check that the communication status of all the devices are normal.
AC\HYBRID system:
Figure 63 BMS
DC system:
Figure 65 BMS
In an AC/Hybrid mode, the Meter 2 status shows YES, which means normal. In a DC
mode, the Meter 2 status shows YES, which means normal. Then EMS can work
normally.
___________________________________________________________________
Page 40 of 46
EMS Introduction and Set up
Step 21: Make sure all the following
number is correct.
Alpha ESS Co., Ltd.
Figure 62 Date&Time Setting Interface
Figure 64 Ethernet and Meter
Figure 66 Ethernet and Meter