Alpha ESS Storion-SMILE-T10 Installation Manual page 21

Your Smart Energy
Installation
Figure 16 Placing the Rear Bracket of HV50056
Step 8: Fix the HV50056 rear bracket with flange nuts on the two bracket of the top
battery, as shown in Figure 16.
Figure 17 Installation of the Rear Bracket of HV50056
Step 9: Cover the PE bag on the top battery to block out the dust before drilling.
Please drill holes directly on the wall at the marking positions of the brackets with an
impact drill (bit φ 8.0mm, length 20cm), and the depth each hole is about 7 cm.
Please insert the expansion tube into the drilled hole. Pass the tapping screw through
the gasket and lock with a screwdriver, as Figure 17 shows.
___________________________________________________________________
Alpha ESS Co., Ltd.
Page 19 of 46