Command #130: Read Device Real Time Clock; Command #131: Read Alarm Setpoints - MSA Ultima X Series Installation & Maintenance Instructions Manual

Request Data Bytes
None.
Response Data Bytes
BYTE FORMAT DESCRIPTION
0-3 ASCII Sensor gas type description
(see TABLE D-8)

Command #130: Read Device Real Time Clock

Reads the Real Time clock hours and minutes from the Ultima X Gas
Monitor.
Request Data Bytes
None.
Response Data Bytes
BYTE FORMAT DESCRIPTION
0 Unsigned RTC Hours
1 Unsigned RTC Minutes

Command #131: Read Alarm Setpoints

Reads the Ultima X Alarm Setpoint values.
Request Data Bytes
None.
Response Data Bytes
BYTE FORMAT DESCRIPTION
0-3 Float Alarm 1 Setpoint Value
4-7 Float Alarm 2 Setpoint Value
8-11 Float Alarm 3 Setpoint Value
D-8