Control Word; Configuration Of The Limit Switches - WEG CFW-11 Applications Manual

Parameters Description

3.6 CONTROL WORD

P1022 – Communication Network Control Word
Adjustable 0000h to FFFFh
Range:
Proprieties:
Access groups via HMI:
Description:
This parameter defines the control word for the crane horizontal motion applicative when the speed reference
control via communication networks has been selected (P1023 = 7).
Each bit of this word represents a command that can be executed via communication networks.
Table 3.3 – Description of the communication network control word
Bits
Function
Bits
Bit 0 0: It removes the load forward command.
Load Forward 1: It executes the load forward command.
Bit 1 0: It removes the load reverse command.
Load Reverse 1: It executes the load reverse command.
Bits 2 to 15 Reserved

3.7 CONFIGURATION OF THE LIMIT SWITCHES

P1025 – Limit Switches Configuration
Adjustable 0 = Without Limit Switches
Range:
1 = Forward Slowdown via DI5 and Reverse Slowdown via DI6
2 = Forward Slowdown via DI5 and Stop Forward via DI6
3 = Reverse Slowdown via DI5 and Stop Reverse via DI6
4 = Forward Slowdown via DI9 and Reverse Slowdown via DI10
5 = Forward Slowdown via DI9 and Stop Forward via DI11
6 = Reverse Slowdown via DI10 and Stop Reverse via DI12
7 = Forward Slowdown via DI9, Reverse Slowdown via DI10, Stop Forward via DI11 and
stop Reverse via DI12
Proprieties: CFG
Access groups via HMI:
Description:
This parameter configures the manner an interlocking function of the crane horizontal motion applicative will be
associated to a digital input. This interlocking is no more than limit switches installed in the forward and reverse
travel course, which indicate operation conditions when activated.
■
Forward Slowdown (speed reduction): With an active forward command and activated sensor (logical level
"0"), It decelerates the motor down to the minimum speed defined at P0133 respecting the ramp defined at
P0101.
01 PARAMETER GROUPS
∟ 50 SoftPLC
15 to 2
01 PARAMETER GROUPS
∟ 50 SoftPLC
Factory Setting:
.....
Values
Factory Setting:
.....
Crane Horizontal Motion | 29
0000h
1 0
0