Project Tree on WLP
6 PROJECT TREE ON WLP
Using WLP programming software can implement or change ladder application of Crane Horizontal Motion
Application, configure the parameters through the Configuration Wizards (2), monitor parameters and variables
through the Monitoring Dialogs (3), monitor variables through Trend Variables Dialogs (4), and upload/download
drive parameters CFW-11 through the parameter Values Dialogues (5). The figure 6.1 presents the project tree
where the functions mentioned before.
Figure 6.1 – Project Tree
6.1 LADDER DIAGRAMS
Using WLP (WEG Ladder Programmer) software is possible to open and to edit the programming done in
ladder language. The figure 6.2 presents a page programmed in ladder.
Figure 6.2 – Ladder Diagrams
Crane Horizontal Motion | 59