YASKAWA CIPR-GA70C Series Initial Steps page 16

9 Mechanical Installation
4.
Remove the terminal wiring covers for wiring the main circuit terminals.
◆
Reattaching the Covers
Wire the drive, then reattach the covers before operating the drive.
■
Reattach the Front Cover
1.
Reattach the wiring cover.
2.
Reattach the front cover to the drive with the supplied screws.
3.
Remove the keypad connector from the connector holder on the front cover.
4.
Put the keypad connector into the connector on the drive in the direction of the hook.
5.
Put the bottom part of the keypad into the drive first, then push the top part of the keypad into the drive to
reattach the keypad.
EN 16 YASKAWA ELECTRIC TOEP C710617 17D YASKAWA AC Drive GA700 Initial Steps