GIRBAU EH020 Operating Instructions Manual page 8

The extra options are extra wash, extra rinse and extra spin. Each option can be
selected independently from each other, once the washing program has been selected.
In the EoPt menu each of the extra options can be turned off if desired.
In the case of extra wash, the user can choose between turning off and increasing time
of wash phase 2.
In the case of extra rinse, the user can choose between increasing time of wash phase 2
and adding a new phase. Phase 2 and 3 must be active.
This same menu makes it possible to enter pricing for the selected options.
The chart shows each option, option selections and the option default status. Under
EUA we see under options 0 – Off, 1 – Increases the wash time in Phase 2 and 2 –
Adds washing phase. The option 2 adding wash phase is not allowed in USA/Canada
models, only adding of time. The next parameter Ut-x (extra washing time in minutes)
allows for selection of 1 – 9 minutes with default at 1 minute.
Note:
Based on what we see in the open markets these times are normally set at a
minimum of 2 minutes with a cost of $0.25 per minute. In the Eri (extra rinse) when
option 2 is selected (adds rinsing phase 5) the cost needs to increase due to the
added water along with time.
8