GIRBAU EH020 Operating Instructions Manual page 6

Introduction and Use (Vended control & profit plus)
This guide is intended to inform owner/operator of operation and basic equipment set up
for vended controlled washing machines with extra options.
Vended X-series control for EH20, 030, 040, 060, 080 and 090 soft mount units plus
REM025, RMG033, 040, 055 and 070 rigid mount units.
It is important that the customer understand as much as possible during the training
startup of the new equipment. Use the control panel above to explain key functions and
display segments.
Characteristics of the control
•
Ease of use microprocessor control
•
Ability of individual program modification
•
Audit of program usage
•
Temperature control achieved by hot and cold valve operation
•
Diagnostic "TesT" feature for troubleshooting washer faults
This new control is unique in that it not only allows ease of use but that it has extended
revenue options that can provide up to 30-40% additional income above standard
vended washers. The extra options are: Extra wash time, Extra rinse phase and/or extra
rinse time along with Extra extraction time.
We next want to show customer how to properly setup the washer vending information
for both standard vend and extra options vending best suited for owner's location. These
settings may vary depending on location. (Consult with owner)
6