GIRBAU EH020 Operating Instructions Manual page 15

It is important that the owner/operator understand as much as possible during the
training startup of the new equipment. Use the control panel above to explain key
functions and display segments.
Characteristics of the control
•
Ease of use microprocessor control
•
Ability of individual program modification
•
Eight different programs with capacity of 9 complete wash phase contents
•
Audit of programs usage
•
Temperature control achieved by hot and cold valve operation to within 3-5f
degree differential
•
Six separate water level settings
•
Program advance feature
•
Diagnostic "TesT" feature for troubleshooting washer faults
Basic Logi control programs
The standard programs are listed below, these programs can be modified through the
Advanced Use mode Located in "Operations Instruction Manual" Cod. 523340 Rev.
10 or later.
Definition of phases
1-2-3 Soak and pre-wash
4 Main wash
5 Optional wash
6-7-8 Cold water rinses
9 Final rinse and extraction
1 5