GIRBAU EH020 Operating Instructions Manual page 25

In fig. 4.3 we see the front loading dispenser system used only in the EH020 models with
a pump drain system. In fig. 4.4 we show the top mounted dispenser system used on all
other models with the Logi Pro control.
Starting a program Logi Pro Control
•
Close loading door, PR** report on display(indicating last program run)
•
Place laundry products into dispenser
•
Select desired program using up arrow or down arrow keys
•
Press start key; the display will show a temperature value (f***)
Note: This indicates main bath temperature of selected program. If operator
wishes to change the programmed temperature it is possible to do so during
this operation by pressing the up arrow or down arrow modifying setting.
•
To continue press start key again to confirm temperature and start the wash
program.
2 5