Features - Lenze i550-C0.25/120-1 Project Planning Manual

Features

The following figures give an overview of the elements and connections on the devices.
Position, size and appearance of elements and connections may vary depending on the
capacity and size of the equipment.
Some equipment may be optional.
Example of 0.25 kW ... 0.37 kW
PE connection
X9 Relay output
Network
X2xx
Option
Network shield connection
Option
Basic network settings
DIP switch or rotary encoder switch
X20 Memory module
X105
Motor connection
Brake resistor connection
Shielding of control connections
X3 Control terminals
Standard I/O or Application I/O
Product information
Features
X100
Mains connection/DC bus
Network status LEDs
Interface
X16
Diagnostic module
IT screw
X1
Safety module
Slot
X109 PTC input
Inverter status LEDs
15