Io-Link V 1.1 - Lenze i550-C0.25/120-1 Project Planning Manual

Product extensions
Networks
IO-Link
IO-Link
IO-Link is the standardized IO technology (IEC 61131-9) for communication with sensors and
actuators. Point-to-point communication is based on the 3-wire sensor and actuator
connection without additional requirements concerning the cable material.
General information
Design
DC supply of the control electronics
and optional fieldbus
Information
Name
Communication medium
Use
Connection system
Status display
Connection designation
Technical data
Topology
Master - slave
Station
Type
Master - slave
Baud rate
Max. Length
Max. Cable length between IO-Link master and
IO-Link slave (i550)
Process data
Input
Output
Processing time of process data
Cycle time
176
Optional
Integrated in standard I/O
Internally via the inverter
Optionally:
External supply

IO-Link V 1.1

Unshielded 3-wire standard cables
Connection of inverter to an I/O master
Pluggable double spring terminal
1 LED
X316: L+, C/Q, L-
Tree (point to point)
Slave
1:1
kBaud/ 230.4
s
m 20
20
12 bytes (fix)
12 bytes (fix)
ms 2
Mains-dependent
Mains-independent
24 V DC
at X3/24E...GND
COM3