Features; Licence Information - Lenze i550 Series Mounting Instructions

Features

0.37 kW ... 11 kW
Network status LEDs
X20 Memory module
X2xx Netw rk, ption o o
DIP switch
Ethernet-based networks
Rotary encoder
switch
X16 Diagnostic interface
Micro-USB
Shield connection
Control cable
X100 Mains connection
Cable glands with shield connection
Meaning of the status LEDs for the various networks
Network
CANopen
Modbus
EtherCAT
Ethernet/IP
PROFINET
Modbus/TCP

Licence information

Lenze Software may contain software elements that are licensed as free software or open
source.The licensing terms and conditions of the open source software components used in this
product can be found on the Lenze website. See licensing terms
Licence information
PROFINET firmware is optional.
The PROFINET firmware uses the following open source software packages under a modified GPL licence:
eCos Operating System. These components are used at the operating system level of the firmware. The
protocol stack does not use source code under a GPL licence. View licence.
LED left
CAN-RUN
COMM
RUN
NS
BUS-RDY
NS
LED right
CAN-ERR
ERR
ERR
MS
BUS-ERR
MS
Product information
Licence information
X109 PTC input
Diagnos tic m odul e
Keypad or WLAN module
Control terminals
X3
Standard I/O
Inverter status LEDs
X9 Relay output
X1
Safety module
Slot
X105 Motor connection
Brake resistor
connection
DC bus
67