Using Your Ceramic Cooktop - Westinghouse WFE904SC User Manual

USING YOUR CERAMIC COOKTOP

Switching the ceramic cooktop on and off
CONTROL PANEL
Switch on
Touch
Switch off Touch
TIPS & INFORMATION
TIPS AND INFORMATION
After switching on, within approx. 10 seconds a heat
setting or a function must be set, otherwise the appliance
automatically switches itself off.
Setting the heat setting
CONTROL PANEL
To increase
Touch
To decrease Touch
To switch off
Touch
TIPS AND INFORMATION TIPS & INFORMATION
The keep warm setting
It is used to keep food warm.
Switching the outside ring on and off
By switching the outside rings on or off, the
effective heating surface can be matched to the size
of the cookware.
TIPS & INFORMATION TIPS AND INFORMATION
Before an outside ring can be switched on, the inside ring
must be switched on.
TRIPLE
COOKING ZONE
To switch on the
middle ring
To switch on the
outside ring
To switch off the
outside ring
To switch off the
middle ring
MULTI-PURPOSE
ZONE
To switch on the
outside ring
To switch off the
outside ring
16
USING YOUR CERAMIC COOKTOP
DISPLAY
for 2 seconds
/
for 2 seconds
/ none
DISPLAY
to
to
until
lies between and
CONTROL
INDICATOR LIGHT
PANEL
Two indicator lights
Touch for
are lit
1-2 seconds
Three indicator
Touch for
lights are lit
1-2 seconds
The third indicator
Touch for
light goes out
1-2 seconds
The second
Touch for
indicator light goes
1-2 seconds
out
SENSOR INDICATOR
FIELD LIGHT
Touch for
is lit
1-2 seconds
Touch for
goes out
1-2 seconds
Locking/unlocking the control panel
The control panel, with the exception of the 'On/Off'
sensor field, can be locked at any time in order to
prevent the settings being changed eg. By wiping over
the panel with a cloth.
Switch on
Switch off
TIPS AND INFORMATION TIPS & INFORMATION
When you switch the appliance off, the locking function
is automatically switched off.
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm
up function. When setting a heat setting using
starting from
for a certain amount of time and then automatically
switches back to the heat setting set.
.
Switch on
(only when
starting at
Switch off
Not used
TIPS & INFORMATION
TIPS AND INFORMATION
If during the automatic warm up
setting is selected, e.g. from
warm up is adjusted.
If there is still residual heat on the cooking zone
(display ), the automatic warm up is not performed.
CONTROL
DISPLAY
PANEL
Touch
(for 5 seconds)
the previously set
Touch
heat settings
, the cooking zone switches to full power
POSSIBLE
CONTROL
HEAT
PANEL
SETTINGS
Touch
to
)
Touch
to /
Touch
to
a higher heat
to , the automatic
, when
DISPLAY
(after
5
seconds)
to
to