Westinghouse WFE904SC User Manual page 51

Underbench installation
Your underbench oven looks best when the control panel
is directly under the benchtop. An upper infill panel may
be added if the cooktop placed above the benchtop is
too deep.
876mm
Mounting holes
NOTE: If a powerpoint is fitted it must be accessible with
the appliance installed.
Vertical cabinet installation
The oven can be built into a vertical cabinet in the
same manner as an underbench. The required cavity
dimensions are the same and the product is secured to
the cabinet in the same way.
100mm
max
900mm
20mm
slot
580mm
*Refer to cooktop installation instructions
for required clearance between cooktop
and oven.
INSTALLATION OF THE APPLIANCE
*20mm
see note
below
51