Using Your Ceramic Cooktop - Westinghouse WFE912SA User Manual

USING YOUR CERAMIC COOKTOP

SWITCHING THE CERAMIC COOKTOP ON AND OFF
CONTROL PANEL
Switch on
Touch for 2 seconds
Switch off
Touch for 2 seconds
TIPS & INFORMATION
After switching on, within approx. 10 seconds a heat setting
or a function must be set, otherwise the appliance automatically
switches itself off.
SETTING THE HEAT SETTING
CONTROL PANEL
To increase
Touch
To decrease
Touch
Touch
To switch off
at the same time
TIPS & INFORMATION
The keep warm setting
keep food warm.
SWITCHING THE OUTSIDE RING ON AND OFF
By switching the outside rings on or off, the effective heating
surface can be matched to the size of the cookware.
TIPS & INFORMATION
Before an outside ring can be switched on, the inside ring must
be switched on.
TRIPLE COOKING
CONTROL PANEL
ZONE
To switch on the
Touch
middle ring
1-2 seconds
To switch on the
Touch
outside ring
1-2 seconds
To switch off the
Touch
outside ring
1-2 seconds
To switch off the
Touch
middle ring
1-2 seconds
MULTI-PURPOSE ZONE
To switch on the
outside ring
To switch off the
outside ring
OPERATION
16
DISPLAY
/
/ none
DISPLAY
to
to
and
lies between and . It is used to
INDICATOR LIGHT
for
One indicator light is lit
Two indicator lights
for
are lit
The second indicator
for
light goes out
The first indicator light
for
goes out
SENSOR FIELD INDICATOR LIGHT
Touch for
is lit
1-2 seconds
Touch for
goes out
1-2 seconds
LOCKING/UNLOCKING THE CONTROL PANEL
The control panel, with the exception of the 'On/Off' sensor
field, can be locked at any time in order to prevent the
settings being changed eg. By wiping over the panel with
a cloth.
CONTROL PANEL
Switch on
Touch
Switch off
Touch
TIPS & INFORMATION
When you switch the appliance off, the locking function is
automatically switched off.
USING THE AUTOMATIC WARM-UP FUNCTION
All cooking zones are equipped with an automatic warm up
function. When setting a heat setting using , when starting
from , the cooking zone switches to full power for a certain
amount of time and then automatically switches back to the
heat setting set.
CONTROL PANEL
Switch on
(only when
Touch
starting at )
Switch off
Touch
Not used
Touch
TIPS & INFORMATION
If during the automatic warm up a higher heat setting is
selected, e.g. from to , the automatic warm up is adjusted.
If there is still residual heat on the cooking zone
(display ), the automatic warm up is not performed.
DISPLAY
(for 5 seconds)
the previously set heat settings
POSSIBLE HEAT
DISPLAY
SETTINGS
(after
to
5 seconds)
to / to
to to