Westinghouse WFE904SC User Manual page 46

INSTALLATION OF THE APPLIANCE
Freestanding installation (continued)
• Connect services to the appliance prior to placing
into cavity.
• To locate appliance, slide into cavity ensuring the
anti-tilt brackets fully engaged with the rear left and
right engagement slots.
• The unit must be pushed against the wall on
installation.
• Re-install oven door, burner body, burner caps and
trivets after the appliance is placed in the cavity.
• Gas only: check that the gas hose, if used, has not
been kinked during installation.
Installing the clip-on kick panel
Models WFE914SC, WFEP915SC, & WFE946SC
are supplied with a clip-on kick panel that can be
assembled to clip onto the front feet for a more
integrated and seamless kitchen appearance.
Clip base
Assemble the clip snap onto the base.
Press in both assembled clip modules into the
kick panel in the orientation as shown below.
46
INSTALLATION OF THE APPLIANCE
Clip snap