Westinghouse WFE904SC User Manual page 19

Displaying the time remaining for a cooking zone
CONTROL PANEL FIELD
1. Select Timer cooking
zone
After a few seconds the pilot light flashes more slowly
Switching off the acoustic signal
CONTROL PANEL FIELD
1. Touch Timer
The acoustic signal stops
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a heat
setting is not set for a cooking zone within approx.
10 seconds, the cooking surface automatically
switches itself off.
• If one or more sensor fields are covered by objects
(a pan, cloths, etc.) for longer than approx. 10
seconds, a signal sounds and the cooking surface
switches off automatically.
• If all cooking zones are switched off, the cooking
surface automatically switches itself off after approx.
10 seconds.
Control panel
• When the appliance is switched off, if one or more
of the sensor fields on the control panel are covered
for more than 10 seconds, an acoustic signal sounds.
The acoustic signal switches itself off automatically
when the sensor fields are no longer covered.
Cooking zones
If one of the cooking zones is not switched off after a
certain time, or if the heat setting is not modified, the
relevant cooking zone switches off automatically and
is displayed. Before being used again, the cooking zone
must be set to .
HEAT SETTING
, –
–
–
DISPLAY
Pilot light of cooking zone
selected flashes faster.
Time remaining is
displayed
ACOUSTIC SIGNAL
The acoustic signal to
acknowledge
SWITCHES OFF AFTER
6 hours
5 hours
4 hours
1.5 hours
USING YOUR CERAMIC COOKTOP
19