Westinghouse WFE904SC User Manual page 25

De-activating the child-proof lock
1. Press and hold the
time until a double beep sounds. This will commence
to unlock the door and after 5 seconds the oven is
ready for use.
Switching the clock display ON and OFF
When the oven is off, the clock display can be switched
on and off.
1. Press together and
switch off the display.
2. Press together and
switch the clock display on again.
When the oven is off and the display is set to the 'off'
state, pressing the or
of day for 5 seconds then turn off the display.
NOTE: If a timer mode is set or the oven is operating,
then it is not possible to switch the display off.
Safety cut-out feature
The oven will automatically switch "Off" if the
temperature is not adjusted or the appliance is left
operating for a period of time. The oven switches itself
off after:
1. 12.5 hours when the temperature is set between 30°C
and 120°C.
2. 8.5 hours when the temperature is set between 120°C
and 200°C.
3. 5.5 hours when the temperature is set between
200°C and 250°C.
4. 3.0 hours when the temperature is set at 250°C.
DEMO mode
The oven can be set to operate in a demo (e.g. in a retail
store) mode. In this mode the oven does not actually
heat if the oven has been inadvertently supplied in this
mode. The following instructions demonstrate how to
exit this mode.
1. Ensure the oven is "Off". Press and hold the
until a beep sounds. The 'Demo' text on the display
will flash.
2. While holding the button, turn the
to the first oven function until another beep is heard.
3. Then turn the selector to the 'Off' position.
4. Release the button.
5. Toggle and hold the
) until 3 beeps sound. The 'Demo' text will no longer
be displayed and the oven will function normally. If
the 'Demo' text is still displayed repeat the above
procedure.
and buttons at the same
symbols for 2 seconds to
symbols for 2 seconds to
buttons will display the time
button
selector
selector to the right (
Operating the Programmable Controller
(WVEP916SB, WVE916SB & WFE946SC)
General features
The oven is equipped with a programmable controller that
can be used to turn the oven on and off automatically.
The "Cook time" function automatically turns the oven
off after a set amount of time. The "End time" function is
used to set the time of day you want the cooking cycle
to finish. A "Delayed start" is possible by combining the
"Cook time" and "End time" features to switch the oven
on and off at a specific time during the day.
Setting the time of day (after electrical
connection)
1. After the appliance has been electrically connected,
the "Set clock" symbol
2. To set the time of day, press
the "Set clock" symbol
3. After 5 seconds from the last change, the "Timer
arrow" symbol will disappear confirming the time
has been set.
NOTE: The clock has a 24-hour display.
Changing the time of day
1. Switch the appliance "Off" by pressing "On / Off".
2. Press "Timer" button repeatedly until the "Set clock"
symbol appears flashing with the "Timer arrow"
symbol on the display.
3. To set the time of day, press
the "Set clock" symbol
4. After 5 seconds from the last change, the "Set clock"
and "Timer arrow" symbol
symbol
confirming the time has been set.
Setting the oven function
1. Switch the appliance "On" by pressing "On / Off". The
oven light will turn on.
2. Press "Function" button repeatedly until the desired
oven function appears. The suggested cooking
temperature for that function will appear in the
display which can be changed as described below.
After 5 seconds from the last change, the oven will
begin to heat.
NOTE: If the oven temperature is less than the set
temperature, the oven temperature and a rising
thermometer icon is displayed. When the oven
temperature reaches the set temperature, 4 beeps sound
and the set temperature and full thermometer icon are
will flash on the display.
or symbols while
is flashing.
or symbols while
is flashing.
will disappear,
USING YOUR OVEN
25