Westinghouse WFE904SC User Manual page 27

4. Press "Fast Heat Up" and the letters "FHU" will
appear and alternate with "Oven temperature" on the
display.
5. When the oven temperature reaches the set
temperature, 4 beeps sound and the set temperature
and full thermometer icon are displayed.
NOTE: "Fast Heat Up" cannot be selected if the oven
temperature is above the set temperature.
Activating the child-proof lock
When the child lock is activated, the oven cannot be
switched on.
1. Switch off the appliance using "On/Off".
2. Press and hold "Function" and
time until the word "SAFE" appears on the display.
The child-proof lock is now engaged.
NOTE: When the child-proof lock function is activated,
only the time of day and minute minder can be set. For
model WVEP916SB & WFEP915SC, the oven door is also
locked when the child lock is activated.
De-activating the child-proof lock
1. Press and hold "Function" and
time until the word "SAFE" is cleared from the display.
The child-proof lock is now disengaged and the oven
is ready to use.
Beep on touch
The "beep on touch" mode can be activated to sound
anytime a button is pressed.
1. Switch the appliance "Off" by pressing "On / Off".
2. Press and hold "Function" and
time. A single beep confirms mode
is activated.
3. Repeat the procedure to de-activate.
NOTE: "On / Off" will continue to "beep on touch" when
mode is de-activated.
Safety cut-out feature
The oven will automatically switch "Off" if the
temperature is not adjusted or the appliance is left
operating for a period of time. The oven switches itself
off after:
1. 20 hours when the temperature is set between 30°C
and 120°C
2. 8.5 hours when the temperature is set between 120°C
and 200°C
3. 5.5 hours when the temperature is set between
200°C and 250°C
DEMO mode
The oven can be set to operate in a demo (e.g. in a retail
store) mode. In this mode the oven does not actually
heat if the oven has been inadvertently supplied in this
mode. The following instructions demonstrate how to
exit this mode.
1. Ensure the oven is "Off". Press and hold the
2. While holding the
3. Then turn the
4. Release the
symbol at the same
5. Toggle and hold the
symbol at the same
symbol at the same
until a beep sounds. The 'Demo' text on the display
will flash.
button, turn the
to the first oven function until another beep is heard.
selector to the 'Off' position.
button.
) until 3 beeps sound. The 'Demo' text will no longer
be displayed and the oven will function normally. If
the 'Demo' text is still displayed repeat the above
procedure.
button
selector
selector to the right (
USING YOUR OVEN
27