Westinghouse WFE904SC User Manual page 23

4. Set the cooking duration you want by using
5 seconds after the last change, the "cook time"
indicator I will stop flashing, and the time of day will
be displayed.
NOTE: Do not forget to add preheating time if necessary.
Setting the cooking end time
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature.
The oven indicator light will glow and the heating
source will come on.
3. Press "mode" until the "end time" indicator I
begins flashing.
4. Enter the time of day you want to finish cooking by
pressing or . 5 seconds after the last change,
the "end time" indicator I will stop flashing and the
current time of day will be displayed.
Setting the delayed start cooking time
1. Program the "cook time" and "end time" as described
in the relevant sections. Once both the "cook time"
and "end time" have been set, the "cook time" and
"end time" indicators will stop flashing and the
current time of day will be displayed.
To check or cancel settings
1. To check your settings, press "mode" until the setting
you want is displayed. A red light will flash next to the
mode that is currently on display.
2. To cancel "delayed start" press "mode" until a light
flashes next to "cook time". Press and hold
the clock no longer reverses ("0:00" and you will hear
a beep). If you have left the temperature and function
knobs at a setting the oven will start once the "end
time" light stops flashing.
3. To cancel "auto off" press "mode" until a light flashes
next to "cook time". Press and hold
no longer reverses ("0:00" and you will hear a beep).
This automatically cancels "delayed start". If you have
left the temperature and function knobs at a setting,
the oven will start once the "cook time" light stops
flashing. Because you have cancelled "auto off" the
oven will continue to heat until you manually turn it off.
On completion of cooking
The oven will turn off, the timer will beep and the "end
time" and/or "cook time" indicators will flash.
1. Turn the function and temperature controls to the off
position.
2. Press or or "mode" to stop the timer from
beeping.
Switching the clock display ON and OFF
1. Press together and
the display.
2. Press together and
clock display 'on' again.
NOTE: If a timer mode is set, then it is not possible to
switch the display off.
or
until
until the clock
for 2 seconds to switch 'off'
for 2 seconds to switch the
Operating WFEP915SC
.
Clock
General features
The oven is equipped with an electronic clock that can
be used to turn the oven on and off automatically. The
function automatically turns the oven off after
a set amount of time. The
set the time of day you want the cooking cycle to finish.
A "Delayed start" is possible by combining the
and features to switch the oven on and off at a
specific time during the day.
Setting the time of day (after electrical connection):
1. After the appliance has been electrically connected,
"12" and the "Set Clock" symbol
2. To set the time of day "Hours" press the
buttons while the "Set Clock" symbol
3. Press the button and the time of day "Minutes"
will flash and can be set in the same manner.
4. After 5 seconds from the last change, the clock
display will stop flashing, confirming the time is set.
NOTE: The clock has a 24-hour display.
Changing the time of day
1. Press button until the "Set clock" symbol
begins to flash on the clock display.
2. To set the time of day "Hours" press the
buttons while the "Set Clock" symbol
3. Press the button and the time of day "Minutes"
will flash and can be set in the same manner.
4. After 5 seconds from the last change, the clock
display will stop flashing, confirming the time is set.
NOTE: The clock has a 24-hour display.
Setting the oven function
1. Turn the oven
the desired oven function. The default temperature
for that function will be shown on the display.
2. After 5 seconds from the last change, the oven will
begin heating and the "Elapsed time" commences on
the display.
Changing the oven temperature
1. Toggle the
required to set the desired cooking temperature. The
temperature setting changes in increments of 5°C.
Temp.
function is used to
will flash.
or
is flashing.
or
is flashing.
selector clockwise to select
selector left ( ) or right ( ) as
USING YOUR OVEN
23