Removing Peripheral Pcbs; Removal Of Display And Keypad Module - Barco F70 Service Manual

Assembly hierarchy
Image 17-7: Left sidecover

17.4 Removing peripheral PCBs

17.4.1 Removal of display and keypad module

1. Remove the PCB Main cover, see chapter 19.1.1
2. 1. Disconnect the Flex Cable from PCB main (J20) by gently lifting up the tab on the connector and remove
cable from the connector.
3. 2. Disconnect PwrKeybpoard cable from PCB main (J19).
Note: Be gentle handling flex cable and lock mechanism.
Image 17-9
4. 3. Remove 6 screws TX10 M3x12, assembly can now be separated from left frame.
Image 17-11
108 723–0018 /02 F70
Image 17-8: Right sidecover
Image 17-10